Hisense H520FI-WD Notice D'utilisation page 13

13
Cation!
Drain the water tank before you take
it down.
Assembling
After cleaning, please assemble the
parts including the head, water tank
and lids as follows:
1.put the seal ring in order first (the
seal ring can not turn up), then insert
the head into the hole.
2.Fit the tank along the guides on the
door.
guide
head
slot
Hisense Refrigerator
3.Push the two sides of the water
tank downward as the picture shows.
4.When you hear a click sound and
the both sides of the water tank is
closed to the door liner, it means the
installation is completed.
Filling water
Before you fill the drinking water into
the water tank, ensure that the water
tank is steady and in a correct
position.
Cation!
Fill with water up to 3L (which is
suggested) and not above the level.
Otherwise, it may overflow when the
lids is closed.
We recommend that you fill the
water by the following ways.
1.Remove the small lid and fill water
from the inlet of the larger lid.
2.Remove the cover of the tank, and
then fill water inside directly.
seal ring