Specific Safety Rules - HP Autozubehor 20361 Mode D'emploi

1. Always use proper guard with grinding wheel. A guard protects operator from broken
wheel fragments.
2. Accessories must be rated for at least the speed recommended on the tool warning
label. Wheels and other accessories running over rated speed can fly apart and cause
injury.
3 Hold tool by insulated gripping surfaces when performing an operation where the
cutting tool may contact hidden wiring or its own cord.
4. Make sure the grinding wheel is not contacting the work piece before the switch is
turned on.
5. Grinding wheel and guard must be securely attached as described in this operating
manual before connecting the angle grinder to power source.
Grinding wheel must be stored in a dry place.
6.
Always hold the grinder firmly with two hands white working and at all times when it is
7.
running.
8. Use only quality certified grinding wheels.
Keep hands away from rotating parts.
9.
10. Be careful not to damage the spindle. outer !lange and inner
parts could result in wheel breakage.
11. When starting the tool (install with a new or replacement wheel). hold the tool in a well
protected area and let it run for one minute to check if the wheel is good or not. Never
start the tool while the operator is standing at in line with the wheel.
12. Know your power tool. Read operator's manual carefully. Learn its applications and
limitations, as well as the specific potential hazards related to this tool. Following this
rule will reduce the risk of electric shock, fire, or serious injury.
13. Always wear safety glasses with side shields. Everyday glasses have only impact
resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of
eye injury.
14. Protect your lungs. Wear a face or dust mask if the operation is dusty. Following this
rule will reduce the risk of serious personal injury.

SPECIFIC SAFETY RULES

5
!lange. Damage to these