Additional Settings; Menu Guide - Leister WELDPLAST S2 Instructions D'utilisation

Additional settings

Contrast setting
In unfavourable lighting conditions and with
ambient temperature fluctuations, the contrast
can be set by using the Back key (25).
Heating ON / OFF
During a longer period on standby, the heating for
PLAST and AIR can be switched off using the Standby/
Enter key (26).
Activate key lock
1. Menu
2. Key lock
3. Activating
If the keypad is locked, 'key lock' will appear
in the display.
The lock is released as follows:
Deactivate key lock
1. Back
2. Reset
3. Select
The reset must be confirmed by pressing the
Select key immediately!
24
Key lock
activated

Menu guide

Menu
Menu
Selection
Select
Functions
Selection
Select
and Back
Back to
workspace
selection