Specifications; The Parts; Before You Begin; Using Your Waring Immersion Blender - Waring Commercial WSB33XE Mode D'emploi

specIfIcatIons

• RATINGS
• MOTOR
• Shaft/Blade Guard Stainless Steel
• Cord
• CE Listed

tHe parts

1. Cord Wrap
2. Speed Control (2-speed switch)
3. Motor Base/Handle
4. Stainless Steel Shaft
5. Stainless Steel Protective Blade Guard
6. Metal Blade
(not shown)

Before You BegIn

NOTE: Always unplug the Waring™ Immersion
Blender before cleaning the metal blade.
Before using the Immersion Blender, Waring™
suggests that you wipe the unit with a clean, damp
cloth to remove any dirt or dust. Place the metal blade
end of the hand blender under running water to rinse it.
Dry thoroughly with a soft absorbent cloth. Read all instructions
completely for detailed operating procedures.
usIng Your WarIng™
ImmersIon Blender
NOTE: Always unplug the immersion blender after each use. Keep
the immersion blender out of reach of children.
• To prevent splattering, be careful never to remove the Waring™
Immersion Blender from the liquid while in operation.
• Use to blend ingredients to make salad dressing, whip eggs, and to
purée soups and sauces.
• Use II (HI) Speed for liquid ingredients, and keep the protective blade
guard at the bottom of the mixing container to prevent splattering.
• For recipes calling for ice, use crushed ice (not whole cubes) for best results.
4
230-240 V, 50Hz
w/RFI Suppression 2 speed II (HI) 20,500 +/-500RPM's
6 feet (Exposed) VDE recognised H03VVH2-F with
VDE plug for E models and UK plug for K models
I (LO) 15,500 +/-500RPM's
2.
3.
5.
1.
4.
6.