Lavorwash PWR4000 Mode D'emploi page 21

Frame Assembly Instructions Continued
Large Frame
1. If applicable, bolt lower
handle onto the frame
using the four bolt holes
labeled with an (A).
2. Slide top part of handle into
lower part. Align holes in the
handle, and insert bolt
through. Secure threader nut
securely (B).
Stainless Steel Belt Drive Frame
1. Bolt the handle and the feet brackets onto the frame through the
same holes (labelled A). Place the feet brackets between the
handle and the frame.
2. If applicable, bolt the feet onto the feet brackets through the holes
labelled with a (B).
3. Bolt bumper on opposite end (C).
4. Slide axle through the axle tube (D).
Pressure Washer Operation Manual
C
C
B
A
A
B
D
A
A
21