Operating The Appliance; Filling/Refilling With Water - SilverCrest SDR 1100 B2 Mode D'emploi

Operating the appliance

WARNING! RISK OF INJURY!
To ensure fault-free operation and a long service life for the
appliance, pay heed to the following instructions:
► Do not press the steam lever
If you press too early, it may cause an accumulation of hot water in the
steam nozzle
of scalding.
► Before switching off, allow all of the steam to escape from the appliance.
Press the steam lever
nozzle
Filling/refilling with water
RISK OF ELECTRIC SHOCK
► Always disconnect the plug from the mains power socket before you add
water to the water tank
CAUTION – PROPERTY DAMAGE!
► The safety valve
the water tank
► Do not put any additives or cleaning agents in the water tank
♦ Open the safety valve
NOTE
► Ensure that you fill the appliance's water tank
♦ Fill the water tank
♦ To do this, use the supplied measuring cup
(see figure). Fill the measuring cup
(approx. 250 ml).
♦ Reclose the safety valve
■ 8 │ GB │ IE │ NI
which will drip or spray from the nozzle. There is a risk
6
until no more steam comes out of the steam
.
6
!
3
can only be opened if all the steam has been let out of
8
.
3
.
8
with water through the filler opening
3
.
8
until the green control lamp
with around 250 ml of water.
3
and the funnel
16
with water up to the marking line
16
lights up.
5
!
3
.
7
for assistance
17
SDR 1100 B2