Kyocera DU-31 Instructions page 12

Setting the Binding Mode
To bind printed sheets like a book is called "binding." There are two forms of
binding; "long edge" which is binding on the long side of the page, and "short
edge" which is binding on the short side of the page. You can select both portrait
and landscape printing for both long edge and short edge binding.
Binding type and printing direction can be set using the following four binding
modes. These are 1 Portrait / Long edge, 2 Portrait / Short edge, 3 Landscape /
Long edge, 4 Landscape / Short edge. (See the figures below.)
Binding mode
Portrait /
Long edge
Landscape /
Long edge
In the portrait/long edge and landscape/short edge modes (1, 4), both sides of the
page are printed in the up to down direction.
In the portrait/short edge mode and landscape/long edge mode (2, 3), the front
side of the page and the rear side of the page are printed in reverse up/down
directions.
Portrait /
Short edge
Landscape /
Short edge
11