Setup; Emp Iv E60 And Emp Iv E60 Plus; Indicators / Controls / Jacks; Plus Versions - Ecolab Elados EMP IV E60 Notice Technique

5

Setup

The external structure and the displays, control elements and connecting sockets on the
EMP IV E60
NOTE
can be found in the PCB configuration, which can be upgraded to achieve the
model. (see chapter 8)
5.1 EMP IV E60
Fig. 5.1
5.2

Indicators / Controls / Jacks

5.2.1 EMP IV E60
Fig. 5.3
417101799_EMP_IV_E60.docx
and the EMP IV E60
PLUS
and EMP IV E60
Fig. 5.2
PLUS
and EMP IV E60 versions
PLUS
are identical. The difference between the two models
Pos.
Pos. Description
1 Fault-LED
2 Graphical display
3 Menu/Exit, up arrow key
4 Menu/Exit, down arrow key
5
Start/Stop key (Enter function)
6
Test key
Cable entry point
7
for any desired connection
8 On-Off switch
9 Cable entry point for Level alarm output
Cable entry point for Pulse / current input,
10
metering disable system
Input for low-level advance warning and empty
11
report (see 7.2.4.1
- 71 -
"E60
Description
1
Electrical motor connection
2
Motor
Oil filler opening with
3
overpressure cap
Control knob for setting the
4
stroke length
5 Oil-level gauge glass
6
Pump head
7
Pressure valve
8
Suction valve
9 Waste oil screw
Connection for diaphragm
10 sensor / diaphragm
breakage drain
Flow direction of the
metering medium
& 14.5.1)
Rev. 9-06.11
PLUS