Important Safety Instructions - Rapid 105E Manuel D'utilisation

GB
1. Read all of these instructions.
2. Save these instructions for later use.
3. Follow all warnings and instructions marked on
the product.
4. Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart,
stand, or table. The product may fall, causing
serious damage to the product.
7. This product is equipped with a 3-wire groun-
ding type plug, a plug having a third (groun-
ding) pin. This plug will only fit into a groun-
ding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the out-
let, contact your electrician to replace your
obsolete outlet. Do not defeat the purpose of
the grounding-type plug.
8. Do not attempt to service this product yourself,
as opening or removing covers may expose
you to dangerous voltage points or other risks.
Refer all servicing to service personnel.
9. Unplug this product from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
1. Main switch
2. Impact control
3. Sight-shield
4. Insert stapler
5. Screw
6. Magazine
7. Magazine release
8. Anvil
9. Trigger (adjustable)
10. Adjustment knob, stapling depth
(trigger)
11. Socket for opto cable
12. Socket, foot control
IMPORTANT
SAFETY INSTRUCTIONS
LIST OF TERMS
A. When the power cord or plug is damaged or
frayed.
B. If liquid has been spilled into the product.
C. If the product has been exposed to rain or
water.
D. If the product does not operate normally when
the operating instructions are followed. Adjust
only those controls that are covered by the
operating instructions since improper adjust-
ment of other controls may result in damage
and will often require extensive work by a qua-
lified technician to restore the product to nor-
mal operation.
E. If the product has been dropped or the cabinet
has been damaged.
F. If the product exhibits a distinct change in per-
formance, indicating a need for service.
10. Keep your fingers away from the stapling area.
11. Disconnect the electric power to the product
before cleaning, adjusting or moving it.
12. Do not allow children to use this product,
unless under supervision of a responsible
adult.
13. Locking plate
14. Foot control
15. Fixing knob - table
16. Table
17. Paper gauges
18. Paper gauges
19. Catch-plate
20. Base
When ordering spare parts use reference numbers
stated in spare parts list 197 79-8.
3