General Hazards At The Workplace - Ecolab MFV II Manuel D'utilisation

2.9

General hazards at the workplace

Risk of slipping
DANGER!
Slipping hazards are marked by the symbol opposite.
Spilled chemicals create a risk of slipping when wet.
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused
by leaking fluids.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
Chemical hazards (dosing medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used
(dosing medium).
– Read the enclosed safety data sheet carefully before using the dosing
medium.
– The safety regulations and the prescribed protective clothing must be
complied with when working with chemicals.
– Attention must be paid to the information included on the product data
sheet of the dosing medium used.
DANGER!
It is essential that that hands are washed prior to work breaks and at the
end of the working day. Information about the usual precautions when
handling chemicals and about the use of PPE can be found on the relevant
safety data sheet for the chemical being used and must be complied with.
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to
ensure that the required personal protective equipment is used.
Preventive action:
– Place product containers in a tank to collect leaking fluids without
harming the environment.
17
Safety and security
417101224 Rev. 05-05.2019