Laundry Guide - Maytag Performance Série Guide D'utilisation Et D'entretien

Only cycles with sanitize wash temperature selected have been designed to meet the
requirements of NSF Protocol P172 for Sanitizing Efficacy.
The Sanitize water temperature provides an extra high temperature wash to remove
99.9% of certain bacteria. It is recommended that you set your hot water heater to
120°F (49°C) to ensure proper performance during this cycle.
The Sanitize water temperature is extremely hot. Please check garment care labels to
avoid garment damage.
In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.
Soils may be difficult to remove.
Wash Water Temperature Suggested Fabrics
Wash Water Temperature
SANITIZE
Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer cycles.
CYCLE SUGGESTED LOAD TYPE
Whitest Whites Heavily soiled white fabrics
Heavy Duty Heavily soiled underwear, towels, work clothes, shirts,
etc.
Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of
polyester, nylon, linen, or cotton blends
Delicate Use this cycle to wash no-iron fabrics and garments
labeled "Permanent Press" or "Wrinkle Free" or that
indicate using a "Gentle" cycle on the care label.
Quick Wash Lightly soiled sports wear made of cotton, polyester,
nylon, or cotton blends
Handwash Fabrics made of silk, special-care items marked
"Handwashable".
Power Wash Heavily soiled work wear-overalls, coveralls, sweatshirts,
pants, and outdoor garments.
20
Certified to Sanitize
Suggested Fabrics
Sturdy colorfast fabrics
Heavy soils

LAUNDRY GUIDE

Wash Water Temperature
HOT
WARM
COLD
In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well.
Soils may be difficult to remove.
Automatic Temperature Control
The automatic temperature control electronically senses and maintains a uniform water
temperature. Automatic temperature control regulates incoming hot and cold water.
Automatic temperature control is automatically turned On when a cycle is selected.
See "Preset Cycle Settings" in Cycles.
NOTE: Automatic temperature control works for all wash and rinse temperature settings.
Signal Fresh Delay
ON/OFF Hold
TM
Start
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
✓ ✓ ✓
Suggested Fabrics
Sturdy colorfast fabrics
Whites and pastels
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
AVAILABLE OPTIONS
Extra Steam
Rinse Clean
✓ ✓
✓ ✓
✓ ✓
✓
✓
✓
✓ ✓
Oxi Max
Treat Extract TM
✓ ✓
✓ ✓
✓ ✓
✓
✓ ✓