AVIRE Connex-02 Manuel D'installation page 8

On the other side of the page please enter the number of elevator group you have in
this installation and how many elevators you have in the group. As an example, if this
is a simplex installation the number of elevator groups will be "1" and the number of
elevators will also be "1". If it's a duplex installation it will be "1" and "2" respectively.
You can also edit the group names to easily identify installations. Once all information
is entered click "Next".
In the new page, you should be able to see Groups and Elevators. Click on "Add
Gateway" under "Gateway" tab and select the relevant option to your system setup.
Please note, you will need to setup the Gateway before the Connex-02 can connect to
the Avire Hub. Please follow device instructions for further information. Once selected
click "Save" in the left corner under the General data column.
8