Bosch GLM 50 C Consignes De Sécurité/D'utilisation page 22

To access the "Basic Settings" Menu, hold down the
function button 7 [Func]. Use the plus button 3 [ ]
or minus button 8 [ ] to cycle through the settings.
The backlit display is automatically turned on when
activating the laser measure or pressing any of the
buttons once the laser measure is activated.
backlit display dims after approximately 20 seconds
to preserve the batteries. When none of the buttons
are pressed for approximately 30 seconds, the display
backlight goes out.
Real Time Measurement
For real time measurements, the laser measure can be
moved relative to the target, whereby the measuring
value is updated approx. every 0.5 seconds. In this
manner for example, the distance displayed on the
screen will change in real time as you move further or
closer to the measured target.
2610050658 01-18 GLM50C.indd 22
Menu "Basic Settings"
Turn sound
On or Off
Calibration
Turn Spirit level
On or Off
0.0°
Automatic Display rotation
0.0°
On or Off
Switch between Font size
Large and Small
Switch between units
0" 1/32
0'00" 1/32
0.000 m
0.00 cm
0.000 ft
Measuring Functions
0.0°
0.0°
Display Backlight
(Large Font)
-22-
The
1/8/18 9:54 AM