Circuit Breaker Reset - Greenlee C3 Auto Whip Manuel D'instructions

Service (con't)
Circuit Breaker Reset Instructions
1. IMPORTANT: Turn off and disconnect the power
from the C3.
2. Remove the circuit breaker access panel located on
the top of the machine.
3. Look down into the machine and inspect the row of
circuit breakers.
4. Identify which circuit breaker has tripped
(the tripped circuit breaker's switch will be
flipped down).
5. Flip up the switch of the tripped circuit breaker.
6. Re-install the circuit breaker access panel.
Greenlee Tools, Inc.
Row of Circuit Breakers
C3 Auto Whip Clad Cable Cutter
34
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070