Control Panel - Domo DO9200IB Mode D'emploi

www.domo-elektro.be
PARTS
1. Water tray
2. Freeze fingers
3. Ice shovel
4. Full basket sensor
5. Transparent lid
6. Ice basket
7. Water tank
8. Filter
9. Drain hole with plug
10. Compressor

11. Control panel

CONTROL PANEL
The indicator above the POWER button will start to blink when the plug is connected
to the power outlet. The appliance is now in stand-by mode. You can switch on
the appliance by pressing the POWER button. The indicator will then remain lit
continuously. If during operation you press the POWER button again, the appliance
will return to the stand-by state.
Press the SELECT button to choose between small or large ice cubes. S is small, L is
large. The indicator light of the selected size will light up.
If the red ADD WATER light lights up, there is not enough water left in the water
tank. Fill the water tank with water and press the POWER button to start the machine
again.
If the ICE FULL light starts blinking, this means that the ice basket is full. The
appliance will stop its operation. Empty the ice basket. If there is no more ice in front
of the sensor, the appliance will automatically continue its operation.
5
1
4
6
31
11
2
3
10
DO9200IB
4
8
9
7