Philips Azur Freemotion Mode D'emploi page 6

ENGLISH
8
Note: Make sure that the base sits on a stable and level surface. It is
recommended to place the base on the soft part of the ironing board.
The light ring starts to flash blue light, indicating the iron is heating
4
up. (Fig. 7)
When the blue light turns steady, you can start ironing. (Fig. 8 )
5
Operation of Smart Charging base
The iron is equipped with Smart Charging base. The light will indicate
the status of the iron, and remind you to charge the iron after 20 to
25 seconds to ensure a good wrinkle removal performance. Please
refer to table 2 for the operation of the base.
Note: to ensure good wrinkle removal performance, always put the iron on
its base during the resting period. Do not place the iron on its heel. (Fig.9)
Table 2
Light status
Flashing blue
Steady blue
Flashing orange
Slow breathing
blue (specific
types only)
Features
Spray function
- Press the spray button to moisten the garment to be ironed. This
helps remove stubborn creases (Fig. 10).
Iron status
Heating up
Ready for use
The iron needs to
be charged now
Safety auto-off has
been activated
Instructions
Wait for iron to be ready.
You can start ironing.
Put the iron back to the
base to charge it.
Refer to Chapter
"Features", section "safety
auto-off ".