Ringer Controls; Visual Ringer; Tone/Pulse Selection - Clarity C320 Mode D'emploi

➤ Ringer Controls

The volume of ring can be adjusted by
pressing the ringer volume up switch or
down switch until the desired ring volume
is achieved.
The style of ring can also be adjusted by
pressing the Ringer Style button. Six ringer
styles are available allowing you to cus-
tomize your ring to your hearing needs.
You can check the volume and style of
ring selected without waiting for an incom-
ing call. The phone will ring indicating the
style and volume selected by pressing the
ringer style button.
When the Ringer ON/OFF is set to OFF,
the red Ringer Off Indicator on the front
of the phone will illuminate. The Visual
Ringer will flash to alert you of an incom-
ing call.
Headset
Neck
Loop
Ringer Style
C320 FEATURES
Ringer
Ringer
Volume
Off/On
Down
Ringer
Volume Up

➤ Visual Ringer

A lighted visual ringer works in conjunction
with the low frequency ringer. It sends out
a flashing alert every time a phone call is
received. (The ringer will light up regard-
less of the setting on the ringer volume
control.)

➤ Tone/Pulse Selection

The C320 phone can be used as either a
TONE (touch dial) or PULSE (rotary dial)
phone. Tone dialing is required for using
special phone services such as long
distance calling. Please check with your
local phone company on certain types
of service.
Note for Users with Pulse/Rotary ser-
vice only: Many automated answering
systems used by banks, stores and gov-
ernment agencies ask you to "Push 1 for
service", "Push 2 for the operator", etc. You
must switch the tone/pulse switch on the
top edge of the phone to tone before
responding to these prompts. In summary,
dial the phone number you want to call in
pulse mode, switch to tone mode to inter-
act with the automated answering system,
switch back to pulse mode when your call
is done. When switching from Pulse to
Tone during a call, there will be a 3 second
delay from the time you first push a key in
Tone mode until the key press is transmit-
ted. You cannot switch from tone to pulse
during a call.
E
N
G
L
I
S
H
13