Using The Smart Control Feature - Samsung NV51K7770S Serie Manuel D'utilisation

Using the smart control feature

To use the oven's Smart Control, you must download the SmartThings app to a
mobile device. Functions that can be operated using the SmartThings app may not
work smoothly if communication conditions are poor or the oven is installed in a
place with a weak Wi-Fi signal.
Please refer to the following table for the main functions that can be operated
from the app.
When Smart Control on the Monitoring (Oven, Probe), Oven off
oven is off
When Smart Control on the Monitoring (Oven, Probe), Oven start, Oven off,
oven is on. Error check
How to connect the oven
Download and open the SmartThings app on your smart device.
1.
2. Follow the app's on-screen instructions to connect your oven.
3. Once the process is complete, the connected
displays and the app will confirm you are connected.
4. If the connection icon does not turn on, follow the instruction in the app to
reconnect.
NV51K7770S_AA_DG68-00857A-03_EN+MES+CFR.indb 37
To start the oven remotely
When Smart Control is on you can:
•
•
•
•
icon located on your oven
Important: Self Clean mode cannot be started remotely.
•
•
•
1.
4:35 PM
Smart Control
Start a cooking at your mobile.
Turn the mode knob to release this mode.
Remotely change oven settings (mode, time, temperature) using your mobile
device.
Remotely start the oven.
Remotely turn off the oven.
Once cooking starts, you can change the cooking time and temperature
remotely.
NOTE
NOTE
Opening the oven door or turning the mode knob to other modes will
deactivate Smart Control and prevent you from turning the oven on or
controlling the oven remotely.
If Smart Control is deactivated, you can still monitor the oven's status and turn
the oven off.
When oven cooking is finished or cancelled, Smart Control will be deactivated.
Turn the Mode knob to Smart Control.
The oven can now be started and
controlled remotely by a connected
mobile device.
English 37
2018-08-29 2:18:30