Safety Instructions - AEG Electrolux PERFECT DB 4050 Mode D'emploi

822 949 208 DB_4050.book Seite 12 Dienstag, 14. Februar 2006 6:46 18
g
g Dear customer
Please read these operating instruc-
tions carefully. Above all please
observe the safety instructions on
the initial pages of these operating
instructions! Please keep these operat-
ing instructions for future reference.
Pass them on to any subsequent owner
of the appliance.
Features (Figure 1)
A Rating plate
B Stainless steel soleplate
C Steam exit holes
D Spray nozzle
E Filling aperture
F Steam selector
G Jet button
H Spray function button
J Power indicator
K Mains cord
L Heel with care information
M Cord storage
N Temperature selector
O Transparent water reservoir
P Measuring beaker
Temperature Selector (Figure 2)
a "Cold" setting
b Synthetics
c Silk/wool
d Cotton/linen
12
1

Safety Instructions

• The appliance may only be operated
using the voltage and current rating
indicated on the rating plate
(Figure 1/A).
• The appliance should only be plugged
into a socket installed according to
regulations.
• Caution! When in use, the soleplate
and cover of the iron reach high oper-
ating temperatures!
• Do not leave the appliance alone when
switched on.Even when leaving the
room for a short period remove the
plug. Keep children away from the
appliance.
1 When steam ironing, steam is emitted
from the holes in the soleplate – risk
of burns!
• Always remove the mains plug before
cleaning the steam iron, filling with
water or emptying.
• Never immerse the steam iron in water!
• Always stand the steam iron on its
heel.
• Do not twist or bend the mains cord or
wrap it round the iron while it is still
hot. Only store the appliance once it is
cool and after emptying any remaining
water.
• Please check the mains cord from time
to time for damage! Special tools are
required to repair a damaged mains
cord. To repair this or any other fault
please contact your specialist dealer or
your local customer service centre.
Repairs to electrical appliances may
only be carried out by qualified spe-
cialists! Repairs carried out by inex-
perienced persons may cause serious
injury to the user.