AEG Electrolux PERFECT DB 4050 Mode D'emploi page 11

822 949 208 DB_4050.book Seite 11 Dienstag, 14. Februar 2006 6:46 18
Ironing table - Recommendations for use
Temperature
Fabric
Selector
Synthetics
Polyacrilic
Polyamide
Polyester
Cellulose
Natural fibres
Silk
Woollens
Cotton
Linen
Setting when
-not in use
For mixed fibres we recommend ironing at the lower temperature (that of the more sensitive fibre),
e.g., polyester-cotton at the polyester setting.
Varied ironing speeds and fabric dampness can mean that the optimal setting can differ from that
recommended in the table!
Steam
Selector
Steam off
"0"
Steam off
"0"
Steam off
"0"
Steam on
"1"–"2"
Steam on
"2"–"3"
Steam on
"2"–"3"
Steam off
= Cold
"0"
g
Comments
Acrylan, Dralon, Lycra, Orlon, Vonnel
Enkalon, Grilon, Nylon, Perlon
Rilsan
Dacron, Diolen, Kodel, Trevira, Vestan
Cellulose fibres, acetate, cupro,
viscose such as: Cuprama, Colvera,
Phyron, Rayon, Tricell
Silk, wool and synthetic fibres can
be dry-ironed by covering with a
damp cloth and ironing over the
cloth
Steam ironing can be used in the low
to medium setting of the steam selec-
tor .
Constant steam possible from •••
position
Super steam jet from ••• position for
stubborn creases
Remove plug
g
11