Parts And Accessories; Before First Use - Braun PowerBlend 3 JB301AI Mode D'emploi

• Never immerse the unit in water or
other liquids.
• Caution: Ensure the complete lid is
placed on the jug before starting into
operation.
• Before plugging into a socket, check
whether your voltage corresponds
with the voltage printed on the
bottom of the appliance.
• This appliance is designed for
household use only and for
processing normal household
quantities.
• Do not use the appliance for any
purpose other than the intended use
described in the user manual. Any
misuse may cause potential injury.
• Do not use any part in the microwave.
• Please clean all parts before first use
or as required, following the
instructions in the Care and Cleaning
section.
• Always operate the blender with the
lid or the guard in position as
indicated in the instructions.
• Never put your hand in jar when it is
placed on the base unit. If food needs
to be pushed down use suitable tool
e.g. spatula.
• Important: Keep all packaging
(plastic bags, polystyrene foam)
away from children.
• Do not use the device without any
load in the jug.
• Do not store food or liquids in the jug.
• Avoid bumping or dropping the
blender when in operation or at any
time.
• In order to avoid a hazard due to
inadvertent resetting of the thermal
cut-out, this appliance must not be
supplied through an external switch-
ing device, such as a timer, or con-
nected to a circuit that is regularly
switched on and off by the utility.

Parts and Accessories

1 Glass Jug
2 Plastic Jug
3 Blade assembly
4 Power base
5 Rotary switch (P/0/Variable Speed)
6 Cord storage compartment
7 Smoothie2Go Attachment
8 Chopper Attachment
9 Metal Grinder Attachment

Before First Use

Clean all parts before using the blender for the first
time – refer to «Care and Cleaning».
Operating Instructions
(A) Jug
The jug is perfectly suited for
• blending smoothies, liquids, sauces, fruit juices
and soups
• mixing soft ingredients (mayonnaise, pancake
batter)
• pureeing cooked ingredients (baby food)
For detailed processing instructions refer to table I.
Blending very hot ingredients may result in hot
liquid and steam being forced past the lid or
measuring cap and cause severe personal injury.
When preparing hot foods or liquids make sure that
the jug including lid is assembled correctly and do
not exceed the maximum quantity shown in table I.
If preparing greater amounts, the ingredients must
be cooled down to room temperature before
processing.
Maximum operation time for the jug is 90
seconds at a time. When processing heavy loads let
it cool down to room temperature for next
operation.
The blender is equipped with a motor protection
which protects the motor from overheating. If the
motor shuts down during the performance, unplug
the blender and let it cool down for 30 minutes
before continue blending.
(B) Smoothie2Go Attachment
The Smoothie2Go attachment is perfectly suited for
preparing drinks and smoothies. For detailed
processing instructions refer to table II.
(C) Chopper Attachment
The chopper attachment is perfectly suited for
chopping vegetables, hard cheese, onions, herbs,
13