LENCO DIR-200 Mode D'emploi page 29

No stations
available/
burbling/intermitt
ent in DAB mode.
Alarm does not
work.
All other
undetermined
cases.
1. Move the radio.
2. Rescan local stations only (high-strength).
3. Check the local DAB+ coverage.
1. Switch on the alarm.
2. This might cause by the volume setting, refer to
the solutions of "No sound".
3. This may be caused by network connection
failure if the source of alarm was set to be radio
station. Change the source of alarm or reconfigure
the connection.
The device may be processing a large amount of
data after a period of operation, no matter in which
mode, it will cause malfunction. Reboot the device if
necessary.
Strong electromagnetic interference may interfere
and cause malfunctions to the device. If the display
indicates a problem, move the device away from near
devices which cause electromagnetic interference or
reset the device.
29