Usb Charging Function; Projection Function - Magnasonic CR6 Serie Guide De L'utilisateur

USB CHARGING FUNCTION

CR61 - CR62 - CR63 - CR64
The USB port on the back of the clock provides 1.0A to charge your electronic devices.
Connect your electronic device to the USB port on the back of the clock
Note: Charging time will vary depending on the charging current that your device requires. Therefore, some devices will take longer
to charge than others. For best charging results, your device's screen should be turned off.

PROJECTION FUNCTION

CR61 - CR62 - CR63 - CR64
1. Press to turn the time projection on or off
2. Adjust the angle of the projection unit forward or backward until the projection is in
the desired location
Note: Recommended distance is 3-9 feet
16
USB