Hornbach 6145059 Manuel D'installation Et De L'utilisateur page 105

Connect awning to stand poles
Attach the roller tube 8 left and
right to the top brackets of the
assembled stand poles 5.
Connect stand poles to fl oor/
ceiling of balcony
Mark and drill holes for the feet.
Example: Concrete
Mark and drill holes for the feet;
use a 10 mm drill bit and drill
5 cm deep. Use the supplied
anchors to secure the stand
poles 5 and adjust at the top.
Adjust the length of the stand
poles 5 and slip them into the
top brackets.
Attach hand crank
Attach the hand crank 3 and
crank out the awning 6. Then at-
tach the front bar 1 left and right
to the support bars 7.
4
5
6
ENGLISH | 105