SYNQ SMP 12.22 Mode D'emploi page 11

ENGLISH
Sound Reinforcement For Live Performance
SYNQ 17/118
®
OPERATION MANUAL
SMP12.22
ENGLISH
SPECIFICATIONS
Power Supply AC 230 V, 50Hz
Power consumption 36W
Max output level (0.5% thd @ 1kHz) +26dB (MAIN L/R)
+20dB (ALT 3/4, AUX/EFX, CTRL ROOM)
+20dB (INSERT)
More than 100mW (HEADPHONES) @33Ohm
T.H.D. <0.1% @ +14dB 20Hz~20kHz (MIX L/R, ALT 3/4, AUX/EFX SEND,
CTRL ROOM) @10kOhm
Frequency response 20Hz~20kHz, +1/-2dB (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL
ROOM) @10kOhm
Hum and Noise (average Rs=150Ohm) -127dB equivalent input noise
-95dB residual noise (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL
ROOM)
-88dB (MIX L/R, ALT 3/4, AUX/EFX SEND, CTRL ROOM) Master
fader at nominal level and all channel assign switches off.
Maximum Voltage Gain 74dB MIC IN TO MAIN L/R
74dB MIC IN TO ALT 3/4
66dB MIC IN TO AUX (PRE)
76dB MIC IN TO AUX (POST)
76dB MIC IN TO EFX
80dB MIC IN TO CONTROL ROOM L/R
52.2dB IN TO REC L/R
54dB LINE IN TO MAIN L/R
54dB LINE IN TO ALT 3/4
46dB LINE IN TO AUX (PRE)
56dB LINE IN TO AUX (POST)
60dB LINE IN TO CONTROL ROOM L/R
44dB STEREO IN TO MAIN L/R
44dB STEREO IN TO ALT 3/4
16dB AUX RETURN IN TO MAIN L/R
20dB TAPE IN TO MAIN L/R
Crosstalk (@ 1kHz) -70dB between input channels
-70dB between input/oputput channels
Gain Control (mono input channel) 44dB Variable (-50dB ~ -6dB) (-30dB ~ +14dB)
Gain Control 40dB Variable (-20dB ~ +20dB)
(combined mono/stereo input channel)
Input channel Equalization HIGH: 12kHz shelving
MID: 2.5kHz peaking
LOW: 80Hz shelving
*Turnover/roll off frequencies: located 3dB below max. boost/cut
LED Meters 2x 10 segment LED for MAIN L/R, ALT3/4, TAPE IN or PFL
Internal Digital Effect 100 selectable presets
FOOT Switch control (ON/OFF)
Channel indicators Peak: an indicator for each channel turns on when the pré-channel
fader signal is 5dB below clipping
Phantom Power (balanced input) +48V DC
Weight 4,6 kg
Dimensions 328(W) x 90(H) x 420(D) mm
SYNQ 18/118
®
OPERATION MANUAL
SMP12.22