App Control Interface Guide; The Applicable Mobile Phone Model By App Control - AKASO A300 Drone Mode D'emploi

APP CONTROL INTERFACE GUIDE

Go to "HFUN" APP interface, please refer to below screen shot in picture 1.
Tap the button enter into real-time image transmitting, as shown in Picture 2.
Tap the "OFF" switch to "ON" on the operating panel to enter the APP controlled flight
interface as shown in Picture 3.
(If the remote control has been connected to the drone, please turn off the remote control
by transmitter.)
Picture 1
Picture 3
12
Picture 2
Picture 4

THE APPLICABLE MOBILE PHONE MODEL BY APP CONTROL

1. iOS
Configuration Recommended
Mobile Phone iPhone 5S \ iPhone SE \
iPhone 6 and above
Model
System version
iOS 8.0 and above
2. Android
Configuration Recommended
Snapdragon 630 and above
Samsung Exynos 7420 and above
The CPU model
Hair aivision Helio X25 and above
Kirin 950 and above
System version
Android 5.0 and above
Memory size
3G and above
CPU usage
Occupancy rate of 25% and below
* Clean up the background program, which can effectively reduce the CPU usage.
WARM TIPS 1
One drone can only be connected to one mobile APP at the same time.
WARM TIPS 2
How to achieve higher recognition when take photo by Gesture:
1. Make sure the camera lens facing to user
2. Please fly in good lighting environment, it is hard to recognize when weakness of
lighting.
3. Take photo by gesture , hand is better at the distance of 2 meters away form the
drone camera.
4. Make sure the WiFi signal is not disturbed or weak.
Optimal
iPhone 6S and above
iOS 8.0 and above
Optimal
Snapdragon 630 and above
Samsung Exynos 7420 and above
Hair aivision Helio X25 and above
Kirin 950 and above
Android 8.0 and above
6G and above
Occupancy rate of 10% and below
13