App Control Of Drone And Camera; App Store - AKASO A300 Drone Mode D'emploi

THE DRONE
PROBLEMS CAUSE
1. The transmitter
switch is on "OFF".
2. The batteries are
Transmitter
installed improperly.
not working
3. Batteries are
completely consumed.
1. The transmitter
switch is on "OFF".
2. The fuselage switch
Control failure
is on "OFF".
3. The transmitter
indicator is flashing.
1. The rotation of main
Ascending
blades is too slow.
failure
2. The fuselage battery is
well consumed.
Landing too The left rocker (accelerator)
soon is pulled down too fast.
PRECAUTIONS:
1. Insufficient electricity power will shorter the control distance.
2. Insufficient electricity power will lead to difficulties in taking off and ascending.
3. Fix the quadcopter if there is any damage. Flying a damaged quadcopter could cause
injuries.
4. Remove the transmitter batteries if not in use in case of battery leakage.
5. Please avoid dropping and crashing the drone, other wise it will damage and shorten
the service life.
6. Before flying, always turn on the transmitter switch first, then the drone switch.
7. After flying, always turn off the drone switch first, then the transmitter switch.
Other wise, the drone will be confused with extraneous signal and be out of control.
10
SOLUTIONS
1. Turn on the transmitter.
2. Check with the pole indications
and reinstall the batteries again.
3. Replace with new batteries.
1. Turn on the transmitter.
1. Turn on the fuselage.
3. Pull down the left rocker
(accelerator) to the end and
replace the batteries.
1. Push up the left lever
(accelerator).
2. Recharge the fuselage battery.
Pull down the left rocker (accelerator)
slowly to perform a smooth landing.

APP CONTROL OF DRONE AND CAMERA

Download the APP
If your mobile phone is operating by IOS system, please download the "HFUN" at APP
store.
You can also scan the QR code provided.
If your mobile phone is operating on Android, please download the "HFUN" at the
Google Play store. You can also scan the QR code provided.
Download on the

App Store

Connecting with Wi-Fi
1. Choose and Connect the Wi-Fi signal of the drone (AKASO-*******).
2. Please switch on the drone, refer to the instruction manual from.
At mobile phone Wi-Fi setting interface, select the Wi-Fi signal sent form the drone
"AKASO-*******", once connected, you are ready to operate the "HFUN" APP .
G ET IT ON
Google Play
11