AKASO A300 Drone Mode D'emploi page 7

4. Flying controlled and fine tuning
When the left rocker push
Ascend/
up or pull down, the drone
descend
is ascending or descending.
Turning when the left rocker
Turning
push left or right, the drone
left/right
turns left or right
accordingly.
When the right rocker push
Forward/
up/down, the drone goes
backward
forth/back.
When the right rocker push
Side Fly left or right, the drone goes
to the left or right.
When the drone is
hovering, and the drond
Side-fly
is deviate to left or right
Fine
then turn the side-fly fine
tuning
tuning to the right or left
balance
unitil the drone keeps
balance.
Note: Please fly the drone to a height 3 meters or more, and then perform the roll control
mode. If the drone can not vertically take off, it can be calibrated.
8
5. Flight Mode
Press 1 Seconds: Headless Mode
Press 3 Seconds: One Button Backing
STOP STOP
According To The Press 3s to According To The
Press 3s to
Three Seconds emergency landing Three Seconds
one-button return
1
3 Different Speed Modes
(Press the left Rocker)
2
1 Press 1 Seconds: Headless Mode
The drone is default the camera to the "head" of drone and turn the direction to left /
right / forward / backward accordingly to.
Headless mode is easier to control and fly back when the drone is out of sight, press the
button as below, orients the drone's direction no matter which direction the "head" of the
drone is facing, that is mean: push rocker to left indicates left, and push rocker to right
indicates right, etc.
1
Press 3 Seconds: One Button Backing
Press the below button, drone fly back to the place start.
2 3 Different Speed Modes
Adjustable Speed Modes: Press the left Rocker to change from low, middle to high speed.
3
3D FLIPS operation
Press the right rocker, then drone will be ready to 3D flip, and control direction by shift
the right rocker left / right / forward / backward, then drone flips accordingly.
3
3D FLIPS operation
(Press the right rocker)
9