RIB KING Mode D'emploi page 21

FIXING THE OPERATOR ATTACHMENT TO THE GATE
(to see the TABLES of the measures).
Before inserting the pin into the gate attachment, grease thoroughly.
Weld the base at the right height (Fig. 8).
Fix the KING and try several times to open and to close the gate, controlling that the
operator does not touch the moving gate.
COL
Column attachment
KING
Z
Y
S1
X
S2
S3
YES !
Make sure to fasten the
bolt that fixes the piston to
the bracket enabling that
this one can easily rotate.
Respect the height 45 and make sure that the piston is in horizontal position
C
α
21
L
ANT
Leaf attachment
KING
A
B
Grease
thoroughly
NO !
The piston must not
change its height during
the different phases of
the mouvement.
ANT KING L
Leaf attachment
KING L
C
D
G
B
8
9