Table des Matières
Publicité
A
ssembly
Your ProHeat 2X CleanShot comes in
three, easy to assemble components:
Upper Handle
Lower Handle
Tool Caddy
The only thing you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide upper handle onto lower handle.
2. Screw 3 screws into the marked holes.
3. Place upper hose rack onto back of
upper handle, and secure with screw.
4. Place lower hose rack onto back of
upper handle by pushing in and sliding
down until it snaps into place.
5. Snap tools into the tool caddy.
6. Wrap power cord and flex hose.
7. Keep flex hose snugly in place by using
the hose secure latch.
ProHeat 2X assembly is now
complete.
O
perations
Special features
Your BISSELL ProHeat 2X CleanShot
deep cleaner is a home cleaning system
that uses the power of heat, brushes
and cleaning formula to get the deep
down dirt for a maximum clean. Not
only does it come with a lot of unique
features, it has been designed with
you, the customer, in mind.
Built-in-heater feature
BISSELL ProHeat 2X models all feature
a patented built-in heater which will
heat the hot tap water you put in up
to 25 degrees hotter to safely optimize
cleaning effectiveness. The heater will
never allow the temperature to exceed
190 degrees. The heater switch on the
front of the machine controls the heater
so you have the option to turn off the
heat if you are cleaning delicate wool
or oriental rugs.
6
w w w . b i s s e l l . c o m
1.
3.
7.
2.
4.
Hose Secure Latch
8 0 0 . 2 3 7 . 7 6 9 1
Publicité
Table des Matières
