ANSMANN NL15AC-2USB Mode D'emploi page 8

ORIGINAL OPERATING INSTRUCTIONS:
These operating instructions are for the ANSMANN
NL15AC-2USB LED nightlight with automatic twilight
control and two USB ports.
They contain important information for first use and
handling. Read through the operating instructions
carefully, in particular the safety instructions, before
using the LED nightlight. Disregard of these operating
instructions can result in a hazard or damage to the LED
nightlight. Keep the operating instructions for future
use.
SIGNS AND SYMBOLS
Please take note of the following symbols and words
used in the operating instructions, on the product and
on the packaging.
= Information:
Useful additional information about the product
= Note: This note warns you of possible damage of
all kinds
= Warning: Attention – Danger! May result in
serious injury or death
The product complies with the requirements
from the EU directives.
8
Waste Electrical and Electronic Equipment (WEEE
directive)
CHECK LED NIGHTLIGHT
NOTE! Risk of damage!
If you open the package carelessly with a sharp knife
or other pointed object the LED nightlight could be
damaged. Be very careful when opening.
1. Remove the packaging material and all of the protec-
tive film (if present).
2. Take the LED nightlight out of the packaging.
3. Check whether the LED nightlight has any damage.
If it shows signs of damage, do not use the LED night-
light. Contact your dealer or the manufacturer.
PROPER INTENDED USE
The nightlight is designed for use in dry and closed
indoor rooms. It is suitable for private household use.
The product is not intended as room lighting and not
intended for commercial use. The LED nightlight is not
a toy. The nightlight is an orientation aid and auxiliary
light in the dark. Use the LED nightlight only as descri-
bed in these operating instructions. Any other use is
considered improper use and can result in material
damage. The manufacturer or dealer accepts no liability