Kobalt SGY-AIR131TZ Mode D'emploi page 6

WA R N I N G
WHAT COULD HAPPEN
Loss of control of the tool can lead to
injury to self or others.
Poor quality, improper or damaged tools
and attachments can fly apart during
operation, propelling particles
throughout the work area causing
serious injury.
Improperly maintained tools and
accessories can cause serious injury.
There is a risk of bursting if the tool is
damaged.
Use only accessories identified by the
manufacturer to be used with specific
tools.
WA R N I N G
WHAT COULD HAPPEN
Using air tools to attach electrical wiring
can result in electrocution or death.
This tool is not provided with an
insulated gripping surface. Contact with
a "live" wire will also make exposed
metal parts of the tool "live" and can
result in electrocution or death.
RISK OF INJURY
RISK OF ELECTRIC SHOCK
HOW TO PREVENT IT
Never use tool while using drugs or
alcohol.
Don't overreach. Keep proper footing
and balance.
Keep handles dry, clean and free from
oil/grease.
Stay alert. Watch what you are doing.
Use common sense. Do not operate
tool when you are tired.
Always use tool attachments rated for
the speed of the power tool.
Never use tools, which have been
dropped, impacted or damaged by use.
Use only impact grade sockets on
this tool.
Do not apply excessive force to the tool;
let the tool perform the work.
Maintain the tool and accessories
with care.
Keep the tool clean. A properly
maintained tool reduces the risk of
binding and is easier to control.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that affects the
tool's operation. If damaged, have the
tool serviced before using.
Use of an accessory not intended for
use with the specific tools increases the
risk of injury to persons.
HOW TO PREVENT IT
Never use tools to attach electrical
wiring while energized.
Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your
body is grounded.
6