Installation Microflow Transducer; Connector Assignments Of Slot Vii (5-Terminal) Input For Batch Pulse And Metering Lock - Ecolab Elados EMP II E60 Mode D'emploi

8.2.2.1

Installation MicroFlow Transducer

8.2.3 Connector assignments of Slot VII (5-terminal)
Input for batch pulse and metering lock
Fig. 8.8 Connector assignments of Slot VII (5-terminal), input for batch pulse and metering lock
 Remove the protective cap
 Mount the connector plug according to the connector assignment.
WARNING
Only use a connector plug from our product range!
417101438_EMP_II_E60
Conductor coloring
Pin
(cable connection)
1 brown
2 white
3 blue
4 black
5 grey
3 + 4
PIN Belegung
3 Signal input MicroFlow- Transducer
4 GND (┴)
Fig. 8.7 Installation MicoFlow- Transducer
Assignment
Output 5 V, DC (load with max. 50 mA)
Input batch metering
Input metering lock
GND (┴)
Free for future use
- 94 -
= MicroFlow- Transducer
Rev. 12-01.19