Configuration Degas Pl Us; Batch / Input (Only At E60 Without Dongle-Box); 10.3.15.4 Display In The Operating Display; 10.3.16.1 Selecting - Ecolab Elados EMP II E60 Mode D'emploi

10.3.15.3 Batch / Input (only at
The "Input" setting is used to determine which input (pulse input or metering lock) at plug II
(or at plug V if a dongle-box is used) of the pump should be used to evaluate the start pulse
for the batch metering.
The start pulse cable connection depends on the selected input:
Input pulse
Input metering lock
NOTE

10.3.15.4 Display in the operating display

Fig. 10.50 Configuration Display in the operating display
10.3.16 Configuration
On activating the
function enables the metering system to be degassed for a controlled time period. When
installing/commissioning the degassing valve, please consult the appropriate operating
instructions, art no. 417101377, EBS no on request.

10.3.16.1 Selecting

417101438_EMP_II_E60
E60 WITHOUT Dongle-box)
= plug II (or plug VII) Pin
= plug II (or plug VII) Pin
In this case, the original function (e.g. pulse) can no longer be used.
When using a dongle box, a separate input is available.
Pos Description
1 Operation mode
2 Quantity remaining to be metered
3 Strokes remaining to be executed
Degas PLUS
"Degas " function and connecting an appropriate degassing valve, this
PLUS
2+4 see chapter
3+4 function" and
pulse ".
Fig. 10.49 Configuration Batch / Input (only at E60 WITHOUT Dongle-box)
Default setting = Metering lock
- 118 -
7.2.3.4 "Installing the batch
8.2.3.1 "Installing the batch
PLUS
Fig. 10.51 Configuration Degas Selecting
- "Degas PLUS " is inactive
(Default setting)
✓ "Degas PLUS " is active
If degassing control is active, the
following items appear in the
submenu:
Menu item see chapter
• Degas strokes 10.3.16.2
• Degas break 10.3.16.3
Rev. 12-01.19