Patek Philippe 6104 Mode D'emploi page 6

ASTRONOMICAL INDICATIONS
Note:
If your watch has stopped running, rewind it by hand before
performing any corrections or adjustments (about 10 clockwise
turns of the crown at 2 o'clock).
Correction push pieces should be actuated exclusively with the
correction stylus that was delivered with the watch. The use of
any other tool could damage your timepiece.
All adjustments must be performed in the order described below.
For information on adjusting the Ref. 6104 Celestial, please
consult our website www.patek.com.
COLLECTION › MOVEMENT-COMPLICATIONS ›
Celestial Ref. 6104 and entering the password "sirius".
SETTING THE MOON
To set the moon, pull the crown at 4 o'clock to
position 2 and turn it clockwise.
• By turning the crown, set the full moon to
the letter "S" (a small arrow index at the
moon simplifies the alignment procedure).
This adjustment may require up to 28 revolu-
tions of the dial!
• In the program on the website, the first line
with the title "Moonphase Revolution"
indicates how many revolutions of the dial
are necessary to display the correct moon
phase for the current date. (For instance, the
number "5" means that you need to rotate the
arrow-shaped moon index past the letter "S"
five times.)
• To set the moon phase to the current time
of day, look up the "Moon Adjustments" line
to find the correct number of "Large
Divisions"and "Small Divisions" on the scale,
then advance the moon index by that many
large and small divisions by turning the crown
at 4 o'clock.
• After performing these settings, press the
crown home again.
SETTING THE SKY CHART
To set the sky chart, pull the crown at 4 o'clock
to position 2 and turn it counterclockwise.
• Align the sky index (small arrow in the Milky
Way) with the letter "S".
• In the program, look up the "Sky Adjustments"
line to find the correct number of "Large
Divisions" and "Small Divisions" on the scale,
then advance the sky index by that many large
and small divisions by turning the crown at 4
o'clock. The scale is located on the outermost
periphery of the dial.
• After performing these settings, press the
crown home again.