Greenlee 555 Serie Manuel D'instructions page 13

Setup (cont'd)
g. For 1-1/2" and 2" IMC with single shoe, use
the rigid/IMC support rollers and IMC squeeze
rollers.
Green
Color
12
h. For 1-1/2" and 2" IMC with single-groove
shoe, use the tail rollers and IMC squeeze
rollers. Keep the squeeze roller size to be used
toward the bender.
Black
Color
13
j. For 1/2" to 1-1/4" rigid, EMT, and IMC with
combination shoe, use the roller adapter and
support roller.
Flat Top
Edge
k. For 1/2" to 1-1/4" rigid and IMC with single
shoe, use rigid/IMC support rollers.
Round Top Edge
Green Color
m. For 1/2" to 1-1/4" EMT with single shoe, use
the EMT support rollers.
Round Top Edge
Silver Color
Greenlee / A Textron Company
10
8
Note: 1/2"–1-1/4" rollers
shown in lowered/disengaged
position.
12
8
8
9
8
9
8
9
555 Series Electric Benders
®
For 1-1/2" to 2" EMT and IMC
5. Slide the roller engagement arm (4) over the main
roller spindle and secure with the roller retainer (5).
6. Mark the conduit according to bend layout
instructions.
7. Place the bender in the desired vertical or horizontal
position.
Zeroing 555DX
1. Use BEND or UNLOAD on the pendant to align the
shoe groove with zero on the bender decal.
2. Press and hold the
To place bender in horizontal position
1. Ensure handle (1) is on bender and pinned in place.
2. Stand in back of the bender, grasp the handle, place
one foot on the kick bar (14), and pull back on the
handle.
3. Gently lower the bender into position.
13
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
button while pressing JOG.