Remote Control Usage; Sound Control - Philips FW-R33 Mode D'emploi

Remote control usage

Open the battery compartment
of the remote control and insert
2 alkaline batteries, type AA (R06,
UM-3).
Do not use old and new or different
types of batteries in combination.
Remove batteries if they are empty or if the remote
control will not be used for a long time.
Batteries contain chemical substances, so they should
be disposed of properly.
The buttons on the remote control work the same way as
the corresponding ones on the unit.
Note: Always press the source key of the source you wish to
control (e.g. CD1) before selecting the desired function key
(e.g. É Å).

Sound control

Volume adjustment
Adjust the volume by using MASTER VOLUME.
The current volume level is displayed.
Incredible Surround
Stereo sound is determined by the distance between the
front speakers. Incredible Surround enables you to enjoy an
incredibly wide stereo effect, regardless of the speakers'
distance.
Press INCREDIBLE SURROUND to switch the surround
sound effect either on or off.
INCREDIBLE SURROUND is displayed if the surround
sound effect is on.
Note:The effect of Incredible Surround may vary with different
types of music.
Optimal Sound
For optimal sound listening, you can adjust only one of the
following sound controls at a time: DSC or VAC.
Remote control/Sound control
DSC
Digital Sound Control enables you to select predefined
sound settings.
Press DSC repeatedly to select the desired sound setting.
Either DIGITAL, ROCK, POP, NEW AGE, CLASSIC or
ELECTRIC is displayed.
Note: For a neutral sound select CLASSIC.
VAC
Virtual Ambience Control enables you to select
predefined surround sound settings.
Press VAC repeatedly to select the desired surround sound
setting.
Either HALL, CINEMA, ARCADE, CONCERT, DISCO or
CYBER is displayed.
MAX SOUND
AUX
This feature enables you to select a predefined optimal mix
of sound and surround sound settings.
Press MAX SOUND repeatedly to switch the MAX effect
either on or off:
MAX OFF: the MAX effect is switched off.
MAX ON: the MAX effect is switched on.
MUTE
This feature allows you to temporarily switch off the sound
without switching off the unit.
1
Press MUTE on the remote control to switch off the sound.
MUTE is displayed and playback/recording will continue
without sound.
2
Press MUTE on the remote control again to switch on the
sound again.
13