Analog Audio Connections; Connecting A Subwoofer - Philips FW-R33 Mode D'emploi

TAPE RECORDER
SUBWOOFER

Analog audio connections

AUX/CDR IN L/R
It is possible to use an additional appliance, e.g. tape
recorder,TV or VCR, with the unit.
1
Connect the red plug of an RCA-style audio cable to the
red jack AUX/CDR IN R and the white plug to the white
jack AUX/CDR IN L.
2
Connect the other end of the RCA-style audio cable to the
audio outputs of the additional appliance.
3
Press AUX repeatedly to select the analog input for the
appliance.
AUX ANALOG H: for standard level input sources
AUX ANALOG L: for low level input sources (when
sound of external source is too low compared to the
internal tuner or CD changer)
4
Operate your appliance as usual and adjust volume and
sound with the unit.
It is not possible to connect a turntable directly to
AUX/CDR IN L/R. If you wish to use a turntable
with the unit, you have to connect an amplifier to
AUX/CDR IN L/R on the unit.Then connect the
turntable to the amplifier.
LINE OUT L/R
You can use these outputs for playback or recording on any
analog audio equipment, e.g. amplifier or tape recorder.
Use an RCA-style audio cable to connect the analog audio
inputs of the additional appliance with LINE OUT L/R on
the unit and operate your appliance as usual.
R L
LINE
OUT
AUX/
CDR
IN
AM ANTENNA FM ANTENNA
SUBWOOFER
OUT
SPEAKERS 6 Ω
1
2
AC
MAINS
~

Connecting a subwoofer

A subwoofer can be used to enhance the bass
performance of your unit dramatically.
Use an RCA-style audio cable to connect the input of the
subwoofer with SUBWOOFER OUT on the unit.
Follow the instructions supplied with the subwoofer.
Installation
9