GreenWorks Commercial GT 161 Guide D'utilisation page 14

OPERATION
INSTALLING THE BATTERY PACK (See Figure 5.)
• Insert battery pack into tool until an audible click is heard.
REMOVING THE BATTERY PACK (See Figure 5.)
• Push and hold the battery release button on the side of the rear housing.
• Take out the battery pack and release the button.
STARTING AND STOPPING THE TRIMMER (See Figure 6.)
To start:
• Press the on/off power button (1).
• Pull the safety lock button (2) back and meanwhile squeeze the switch trigger (3) to start.
• Push the speed button forward to adjust speed depending upon grass condition.
To stop:
• Release the trigger to stop the trimmer.
• Press the power button to turn the unit off.
14