Würth SBS 10-A Traduction Des Instructions De Service D'origine page 14

❏ Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
❏ If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-
related hazards.
Power tool use and care
❏ Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
❏ Do not use the power tool if the switch does
not turn it on and off. Any power tool that can-
not be controlled with the switch is dangerous and
must be repaired.
❏ Disconnect the plug from the power source
and/or the battery pack from the power
tool before making any adjustments,
changing accessories, or storing power
tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
❏ Store idle power tools out of the reach of
children and do not allow persons unfamil-
iar with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
❏ Maintain power tools. Check for misalign-
ment or binding of moving parts, breakage
of parts and any other condition that may
affect the power tool's operation. If dam-
aged, have the power tool repaired before
use. Many accidents are caused by poorly main-
tained power tools.
❏ Hold power tool by insulated gripping sur-
faces, when performing an operation
where the cutting accessory may contact
hidden wiring. Cutting accessory contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
❏ Keep hands away from the sawing range.
Do not reach under the workpiece. Contact
with the saw blade can lead to injuries.
❏ Keep cutting tools sharp and clean. Properly
❏ Use the power tool, accessories and tool
Battery tool use and care
❏ Recharge only with the charger specified by
❏ Use power tools only with specifically des-
❏ When battery pack is not in use, keep it
❏ Under abusive conditions, liquid may be
Service
❏ Have your power tool serviced by a quali-
Safety Warnings for Sabre Saws
❏ Apply the machine to the workpiece only
❏ When sawing, the adjustable footplate 2
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
bits etc. in accordance with these instruc-
tions, taking into account the working con-
ditions and the work to be performed. Use
of the power tool for operations different from
those intended could result in a hazardous situa-
tion.
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
ignated battery packs. Use of any other battery
packs may create a risk of injury and fire.
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a con-
nection from one terminal to another. Short-
ing the battery terminals together may cause burns
or a fire.
ejected from the battery; avoid contact. If
contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the bat-
tery may cause irritation or burns.
fied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
when switched on. Otherwise there is danger of
kickback when the cutting tool jams in the work-
piece.
must always faces against the workpiece.
The saw blade can become wedged and lead to
loss of control over the machine.
14