Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Figure 3 - Wrenches
Always Turn
This Wrench In
The Opposite
Direction
Figure 4
3. Do the opposite of Step 2 to loosen
and change the grinder attachment.
is fully inserted into collet opening
and collet is securely tightened. Loose
attach-ments could fly off during
operation and cause serious injury. Only
use attachments rated for a minimum of
25,000 RpM.
To Tighten
Collet Turn
Wrench To The
Right
Make sure
attachment stem
www.campbellhausfeld.com
CL252100AV, CL254100AV
Maintenance
Release all pressure before
attempting to install, service,
relocate or perform any
maintenance on the air system. personal
injury and/or property damage could
occur.
stoRaGe
The tool must be lubricated before
storing. Follow the air motor lubrication
instructions with an exception to step
4. Only run the tool for 2 to 3 seconds
instead of 20 to 30 seconds because
more oil needs to remain in the tool when
storing.
technIcal seRvIce
For information regarding the operation
or repair of this product, please call
1-855-504-5678.
Replacement paRts
InFoRmatIon
For information regarding where to order
replacement parts, call toll free 1-855-
504-5678.
Please provide the following information:
• Model number
• Stamped code
• Part number and description
Address parts correspondence to:
Campbell Hausfeld
100 Production Drive
Harrison, Ohio 45030 U.S.A.
5
Publicité
Table des Matières
