Tornado VS4 Mode D'emploi page 6

NEVER REMOVE GROUNDING PRONG
FROM POWER PLUG.
EXTENSION CORDS
Use only three-wire extension cords that
have three-prong grounding-type plugs and
three-pole receptacle that accepts the ap-
pliance's plug. Replace damaged or worn
cord immediately.
DO NOT ATTEMPT TO REPAIR POWER
CORD.
Figure A
1 Grounded outlet box
2 Current carrying prongs
Grounding prong is longest of the 3 prongs
Figure B
1 Grounded outlet box
2 Grounding means
3 Adapter
6
Note: In Canada, the use of a temporary
adapter is not permitted by the Canadian
Electrical Code.
Servicing of double-insulated machines
In a double-insulated machine, two sys-
tems of insulation are provided instead of
grounding. No grounding means is provid-
ed on a double-insulated machine, nor
should a means for grounding be added to
the machine. Servicing a double-insulated
machine requires extreme care and knowl-
edge of the system, and should be done
only by qualified service personnel. Re-
placement parts for a double-insulated ma-
chine must be identical to the parts they
replace.
EN