Slave Mode - Cameo CLSTORM Manuel D'utilisation

OPERATION:

SLAVE MODE

Press the MODE button repeatedly until the LED indicator for the slave mode
(SLAVE) lights up and displays "SLAV" on the display (the characters on the
display are flashing). Confirm the entry by pressing ENTER. Once the slave
unit has been connected to the master unit (same model) with the help of
a DMX cable (Master = DMX OUT, Slave = DMX IN), and the master unit
has been set to one of the standalone modes (automatic control or music
control), the slave unit follows the master unit and the characters on the
display will stop flashing.
12