Backlight; Blue Background; Audio Description - Hitachi 26H8L02-G Manuel D'utilisation

Conditional Access
Language
Parental
Timers
Date/Time
Sources
Menu Timeout
Active Antenna
Scan Encrypted

Backlight

Blue Background

Software Upgrade
Hard of Hearing

Audio Description

Auto TV Off
Broadcast Type
Standby Search
Auto Channel Scan
Manual Channel Scan
Analog Fine Tune
First Time Installation
01_MB6X_[GB]_HITACHI_ORTAK_IB_50214635.indd 13 01_MB6X_[GB]_HITACHI_ORTAK_IB_50214635.indd 13
Menu Features and Functions (Optional)
Settings Menu Contents
Controls conditional access modules when available.
Confi gures language settings.
Confi gures parental settings.
Sets timers for selected programmes.
Sets date and time.
Enables or disables selected source options.
Other Settings: Displays other setting options of the TV set:
Changes timeout duration for menu screens.
This feature enables or disables the use of active antennas. When antenna power option
is set as On, +5V will be transmitted to the antenna output.
When this setting is on, search process will locate the encrypted channels as well. If it is set
as Off, encrypted channels will not be located in automatic search or manual search.
This setting controls the backlight level and it can be set to Maximum, Minimum, Medium
and Eco Mode (optional).
Activates or deactivates blue background system when the signal is weak or absent.
To ensure that your TV always has the most update information, you can use this setting.
In order for the proper operation, please ensure that the TV is set to standby mode.
If the broadcaster enables any special signal concerning the audio, you can set this setting
as On to receive such signals.
Audio description refers to an additional narration track for blind and visually impaired
viewers of visual media, including television and movies. You can use this feature, only
if the broadcaster supports that additional narration track.
You can set the timeout value of auto off feature.After the timeout value is reached and
the Tv is not operated for selected time , the TV will go off.
When you set the desired broadcast type by using " " or " " button, the TV will display
the related channel list. If the related source has does not include any stored channels,
"No channels for this type have been found." message will be displayed on the screen.
If you change Standby Search to Off, this function will be unavailable. To use Standby
search please make sure that you select Standby Search as On.
Installation Menu Contents
Displays automatic tuning options. Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analog stations.
Full: Searches and stores both analog and aerial DVB stations
This feature can be used for direct broadcast entry.
You can use this setting for fi ne tuning analogue channels.
Deletes all stored channels and settings, resets TV to factory settings and starts fi rst
time installation.
English - 13 -
10.02.2012 17:52:50 10.02.2012 17:52:50