Step 5: Power Up The Booster - Wilson Electronics weBoost Office 100 Guide D'installation

______

Step 5: Power Up The Booster

Plug the power supply into wall outlet then connect to end of booster
labeled " " and enjoy your boosted signal.
NOTE: We strongly recommend using a power strip with surge protection.
to power
18 METER HORIZONTAL OR 7.5 METER VERTICAL DISTANCE
8
Troubleshooting section recommends increasing distance
further if needed.
Inside
Antenna
CELL PHONE SIGNAL BOOSTER
Booster
to power
Outside
Antenna
OFFICE 100