Vacuuming - Siemens VS08G Serie Notice D'utilisation

Vacuuming

a
CLICK!
CLICK!
b
10
Adjusting the floor nozzle:
For cleaning rugs and carpets =>
For cleaning hard floors
Vacuuming with accessories
Figure
Pull the combination tool in the direction of the arrow
to remove it from the tool holder.
a)Crevice nozzle
For vacuuming in crevices and corners.
For difficult to get to places, the combination tool
can be extended in two stages by pulling out the
crevice nozzle.
Extend the crevice nozzle to the second stop until
you can hear it engage.
To push the crevice nozzle together again, release
the telescope lock (by pressing in arrow direction).
b)Upholstery nozzle
For cleaning upholstery, curtains, etc.
c)Furniture brush
For window frames, cabinets, profiles etc.
c
Fold the upholstery nozzle over in the direction of
the arrow.
To extend the brush ring, turn in the direction of
the arrow.
Before replacing the combination tool in the
tool holder, the brush ring must be retracted
and the upholstery nozzle folded back.
en
=>