GreenWorks Commercial GL 900 Manuel Du Propriétaire page 20

TROUBLESHOOTING
Always disconnect the battery from the power tool before performing any maintenance work.
PROBLEM
LED on charger flashes red.
CAUSE
Malfunction in charger.
20 20
SOLUTION
• Check the current at the power
outlet with another tool. Make
sure that the outlet is not turned
off.
• Check that the charger contacts
have not been shorted by debris
or foreign material.
• If the air temperature is above
100ºF or below 45ºF, move the
charger and battery pack to a
room temperature location.
H a v e c h a r g e r c h e c k e d b y
GREENWORKS servicing dealer.