Replacing Oven Lights - Bertazzoni Master Serie Manuel D'utilisation

SIMPLE MAINTENANCE
Keeping appliance area clear and free from com-
bustible materials, gasoline and other fl amable
vapors or liquids.
Not obstructing the fl ow of combustion and venti-
lation air.
These simple tasks can be performed by the
owner. For any other maintainance task, we re-
commend employing a trained service technician.
Please call our toll free line to identify service te-
chnicians in your area:
ENGLISH 866 905 0010
if located in the US, BC, B, Sk and MB
FRANCAIS 800 561 7265
if located in ON, QC, PE, NU, NS, NL, NB

REPLACING OVEN LIGHTS

Warning! Electric shock hazard!
Disconnect the electric power at the main fuse
or circuit breaker before replacing bulb. DO NOT
touch bulb with bare hands. Clean off any signs of
oil from the bulb and handle with a soft cloth.
Side oven light
Bulb type: halogen G9 120 V, 40 W
•
Make sure the heating elements are turned off
and allowed to cool completely. Disconnect the
appliance from the power supply. Remove the
oven rack if it interferes with the light housing.
•
Slide the tip of a fl at screw driver between the
glass cover and the lamp housing. Gently twist
the screw driver tip to loosen the glass lens co-
ver, holding it in place with your fi ngers to pre-
vent it from falling and breaking.
•
Remove the glass lens cover and then remove
the halogen bulb.
•
Place a new halogen bulb in its slot. DO NOT
touch bulb with bare hands.
1
•
Press the glass cover back into place and re-
place the oven rack.
•
Reconnect the oven to the electrical supply.
Top oven light
Bulb type: halogen G9 120 V, 40 W
•
Make sure the heating elements are turned off
and allowed to cool completely. Disconnect the
appliance from the power supply.
•
Unscrew the glass cover and remove the halo-
gen bulb.
•
Place a new halogen bulb in its slot. DO NOT
touch bulb with bare hands
•
Screw the glass cover back in place.
•
Reconnect the oven to the electrical supply.
/ Simple maintenance
2
1
2
19