ASROCK 775Dual-VSTA Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

2.8 HDMI_SPDIF Header Connection Guide
2.8 HDMI_SPDIF Header Connection Guide
2.8 HDMI_SPDIF Header Connection Guide
2.8 HDMI_SPDIF Header Connection Guide
2.8 HDMI_SPDIF Header Connection Guide
HDMI (High-Definition Multi-media Interface) is an all-digital audio/video specification,
which provides an interface between any compatible digital audio/video source,
such as a set-top box, DVD player, A/V receiver and a compatible digital audio or
video monitor, such as a digital television (DTV). A complete HDMI system requires a
HDMI VGA card and a HDMI ready motherboard with a HDMI_SPDIF header connected.
This motherboard is equipped with a HDMI_SPDIF header, which provides SPDIF
audio output to HDMI VGA card, allows the system to connect HDMI Digital TV/
projector/LCD devices. To use HDMI function on this motherboard, please carefully
follow the below steps.
Step 1. Install the HDMI VGA card to the PCI Express Graphics slot on this
motherboard. For the proper installation of HDMI VGA card, please refer to
the installation guide on page 15.
Step 2.
Connect the black end (A) of HDMI_SPDIF cable to the
HDMI_SPDIF header (HDMI_SPDIF1, yellow, see page 2, No.
23) on the motherboard.
Make sure to correctly connect the HDMI_SPDIF cable to the motherboard and the
HDMI VGA card according to the same pin definition. For the pin definition of
HDMI_SPDIF header and HDMI_SPDIF cable connectors, please refer to page 20. For
the pin definition of HDMI connectors, please refer to the user manual of HDMI VGA
card vendor. Incorrect connection may cause permanent damage to this motherboard
and the HDMI VGA card.
Step 3.
Connect the white end (B or C) of HDMI_SPDIF cable to the HDMI connector
of HDMI VGA card. (There are two white ends (2-pin and 3-pin) on HDMI_
_SPDIF cable. Please choose the appropriate white end according to the
HDMI connector of the HDMI VGA card you install. Currently, the HDMI con-
nector of HDMI VGA card with ATI chip is 3-pin (C), and the HDMI connec-
tor of HDMI VGA card with other vendor's chip is 2-pin (B).)
Please do not connect the white end of HDMI_SPDIF cable to the wrong connector
of HDMI VGA card or other VGA card. Otherwise, the motherboard and the
VGA card may be damaged. For example, this picture shows the wrong
example of connecting HDMI_SPDIF cable to the fan connector of PCI
Express VGA card. Please refer to the VGA card user manual for
connector usage in advance.
Step 4.
Connect the HDMI output connector to HDMI device, such as
HDTV. Please refer to the user manual of HDTV and HDMI
VGA card vendor for detailed connection procedures.
Step 5.
Install HDMI VGA card driver to your system.
ASRock 775Dual-VSTA Motherboard
white end
white end
(3-pin) (C)
(2-pin) (B)
2 1
2 1
2 1
2 1
2 1

Publicité

Table des Matières
loading

Table des Matières