hestan AGPB24 Manuel D'utilisation Et D'entretien page 24

CLEANING AND MAINTENANCE
(continued)
IGNITERS
The spark igniter on the center burner is partially exposed and can be contaminated in the event
you have a boil-over when using the Power Burner. You can gently clean it with a soapy water
EN
solution and a toothbrush. Wipe down with a clean cloth. The spark igniter for the octagonal
burner is also similarly exposed and subject to contamination. Excersize more caution when
attempting to clean this igniter as its position relative to the burner is critical for proper ignition
and to reduce the chance of nuisance sparking during operation.
NOTE: Rough handling of the igniter can crack the ceramic body, causing it to fail. Handle with
care.
ADDITIONAL CONSIDERATIONS
Always keep the area around the Power Burner free of obstructions and debris. Maintain at least
9" (23 cm) of space around the Power Burner to ensure proper airflow, and keep all ventilation
openings clear and free of debris. Clean the appliance after each use, and check for blockages,
especially at the burner orifices, after periods of prolonged non-use. To maintain the appearance
of your Hestan Power Burner for many years, keep it covered when not in use. Backyard
environments are harsh on your appliance's finish. Long exposure to sun, water, yard chemicals
and the elements could diminish the appearance of the stainless steel. This is very evident in
ocean-front locations.
Our appliance materials have been tested in saline solutions with higher salinity than seawater.
They have also been tested by exposure to highly acidic foods. During and after these tests,
we found these materials were able to withstand exposure over prolonged periods of time.
However, the above-mentioned corrosive substances, along with neglect, can lead to a situation
whereby conditions might combine to cause some damage to occur. Therefore, we suggest that
you always keep your Power Burner clean, dry and covered when not in use. This is even more
important when long term storage is required. Always store the Power Burner clean, dry and
covered with your Hestan Power Burner cover. A dirty Power Burner will attract insects and
rodents which is highly unsanitary. In addition, rodents are known to chew on the insulation of
wiring which will cause permanent damage to the wiring and possibly electrical components.
For those in desert communities, wind-driven sand is highly abrasive and constant exposure will
eventually pit and scratch the surface. Another reason to keep your Power Burner covered when
not in use.
22
©2017 Hestan Commercial Corporation